Blogs

If one day you're engrossed in your phone in your bedroom and the light suddenly goes out, but it's not because the power is off, then your table lamp bulb is probably broken. It's normal for table lamp bulbs to burn out after a while, so don't worry, just replace the bulb.

Once you've confirmed it's the bulb, you need to check the bulb's model number. Make sure the power is off, otherwise it could be unsafe. Most bulbs only have one model number, though some have two or three. They're all the same. Most people don't remember the shape, size, or wattage of a bulb (the wattage is written on the side of the bulb), so I suggest gently removing it first. This step is crucial; use even force, not too much, or it might break.

Now you can go out and find a suitable table lamp bulb. Most small supermarkets sell them. They cost around 3 yuan, about ten times cheaper than a new lamp. Just find an identical bulb for the broken one.

Then, following the same method you used to remove the bulb, gently reinstall the new one, and then reconnect the power. The lamp will then light up again. That's it. We hope everyone will cherish their table lamp during use.

Precautions: The bulb is fragile; handle it carefully, whether holding it or storing it. Never connect it to a power source while changing the bulb. Do not disassemble the lamp's internal components without professional qualifications.

After reading the above introduction on how to change a table lamp bulb, you should now understand the process. When changing a bulb, it's essential to use the correct method to achieve the best results. If a table lamp bulb is broken, you should replace it promptly or have it repaired by a professional; both methods will ensure a satisfactory outcome.