How to Wire a Table Lamp Switch?
In our daily lives, we can't do without table lamps. Table lamps are a great help for bedroom lighting. So, how should we wire the switch for a table lamp? Today, I'll tell you how to wire a table lamp switch, hoping it will be helpful. Let's take a look.
1. First, we need to understand these two wires: one is black, and the other is red. The neutral wire is black, and the live wire is red.
2. After understanding these wires, find a screwdriver and use it to remove the screws under the table lamp base.
3. Next, open the outer casing of the base. After opening the casing, we will see a bundle of wires and a battery wrapped together. There are red and black wires. The red wire is the positive wire, and the black wire is the negative wire. If the battery has reached the end of its life, we can use scissors to cut the wires and remove the battery.
4. After cutting off one end of the original wire, take out the new wire, align the red wire with the red wire and the black wire with the black wire, and then connect them. Wrap it with insulating tape.
5. We can cut a notch in the side of the table lamp casing to hide the wire inside, saving space. Finally, put the base cover on and tighten it with a screwdriver.
Final Summary
The above is the relevant content and method on how to wire a table lamp switch. We hope it can be helpful to you.
