Blogs

After purchasing a table lamp, you need to correctly connect the wires inside the lamp switch to the lamp fixture. So, what are the wiring methods for table lamp switches? Today, I will introduce them to you in detail.

1. One type is single-pole switch wiring. When wiring, first, you need to pass the neutral wire directly through the lamp fixture, and then connect the neutral wire to the center point of the lamp wire. Next, connect the two ends of the switch with wires. When connecting the outgoing wires, one wire should be connected to the center point of the voltage, and the other should be connected to the lamp switch. After installation, check if the switch works properly.

2. If connecting a double-pole switch, first connect the two switches in parallel. One switch should be connected to the live wire, and the other switch should be directly connected to the control wire. Also, make sure the live wire and neutral wire are properly connected to achieve the double-pole control.

What are the precautions for switch wiring?

1. Different switches have different installation heights. 1. If installing an air conditioner switch, the height from the ground should be at least 1.6 meters. If installing a range hood, its socket switch should be at least 2 meters from the ground. However, the refrigerator socket switch does not need to be too high; 0.3 meters from the ground is sufficient.

2. When installing a table lamp, pay attention to the wiring. Since most people are right-handed, it can be installed on the right side for easy turning the light on and off.

Final Summary

The above content covers the wiring method for table lamp switches. However, the wiring method may vary depending on your habits and the type of switch.